How To Clean Ge Window Air Conditioner

Disclosure: We may become commissions for purchases made through links in this mail service.

Are you wondering how to properly clean your GE air conditioner to make it more than efficient at cooling? You've come to the correct place, for we have researched this question, and we accept the answer for you.

There is an easy procedure of cleaning your GE window air conditioner without removing information technology from the window. Here are the summarized steps to do this:

1. Unplug your air conditioner.
2. Remove the front end grill cover and set it aside.
3. Remove the filters. Clean separately.
4. Unscrew the front casing and pull information technology out.
5. Employ a vacuum with a soft castor attachment to loosen the dust on the grills.
6. Once you've cleared most of the dust, spray the fins with a no-rinse foaming curlicue cleaner.
7. Employ a fin brush to thoroughly clean the fins. Utilise a fin comb to make them straight.
8. Remove the embrace on the back of your air conditioner.
9. Spray the coils and fins on the outdoor side with the same foaming coil cleaner.
10. Let your air conditioner dry naturally.
11. Reassemble the covers back.

Become the detailed instructions in the sections below. Additionally, we also included steps on how to make clean other types of GE air conditioners. Read on!

How to clean a GE window air conditioner?

Cleaning your GE air conditioner without removing information technology from the window is ideal for air conditioners that are hard to remove.

Here are the steps for cleaning your air conditioner in detail. We also included the steps in case you programme to remove your GE air conditioner from the window.

Preparing Your Air Conditioner For Cleaning

Initial Preparation

1. Plow off your air conditioner.
2. Unplug the air conditioner.
3. Remove the drain plug from your air conditioner and drain the accumulated water.

Removing Your Air Conditioner From The Window

If you lot're non removing your GE air conditioner from your window, you lot tin skip this section and proceed to the next.

1. Carefully remove whatsoever insulating seals or record that you installed.
2. Unscrew the accordion curtain frame from the window frame. Fix bated the screws where y'all tin hands find them later.
3. Unscrew the side brackets that hold your air conditioner in place. These small brackets are on the side of your air conditioner. Unscrew information technology from the windowsill. Set aside the screws
4. Carefully pull your air conditioner out.

Removing The Covers

1. Printing the latch to release the front grill of your air conditioner. The latch tin exist found on both sides in some models. At that place are models where you can only pull the front end grill using two small tabs on the grill.
2. Remove the filter.
3. Unscrew the front casing. Removing the front grill will expose the screws that concord the front end casing in place. Set up aside the screws after removing them. There are some models where the front grill and the front casing are one slice. If this is the instance, you just need to unscrew the front casing to remove both.
4. Unscrew the back cover of your air conditioner and gear up it aside.

Cleaning The Filters And Covers

1. Rinse the filter in lukewarm water.
2. Soak it in a solution of water and mild dishwashing liquid. Brand certain to proceed it submerged for at least 5 minutes.
3. Utilize a soft brush or an old toothbrush to gently scrub the filter. Exercise non scrub likewise hard. You exercise not want to poke a pigsty in the filter and end up replacing it.
4. Rinse the filter with warm h2o.
5. Let the filter dry naturally.
6. Follow the same procedure for cleaning the front grills and covers.

Removing Excess Dust From Your Air Conditioner

1. Install a soft brush attachment on your vacuum cleaner. If your vacuum cleaner doesn't have a soft brush attachment, employ a separate soft fin brush and hold it in one hand while y'all hold the vacuum cleaner on the other.
2. Gently scrub the fins with the brush while running the vacuum. The brush will loosen the grit, while the vacuum will immediately suck the loose dust before it spreads out.
3. Do the same matter for the fins at the back. Your air conditioner has 2 coils with its own ready of fins. The evaporator coil is what you see in front, and the condenser scroll is what you have at the back of the air conditioner.
4. Vacuum any dirt at the back like dead leaves and fur.
5. Use a fin rummage to straighten any fin that has become bent.

The air conditioner condenser fin whisk brush from the Midwest Hearth Store is bachelor on Amazon. Check it out through this link.

Deep Cleaning Your Air Conditioner

1. Use a no-rinse foaming scroll cleaner to thoroughly clean the fins. Just spray the coil cleaner on the fins of your air conditioner. Make sure that the fins are all covered with cream and let it soak. The foam volition dissipate on its own and leave the surface of your air conditioner fins clean. Echo as necessary. The foaming curlicue cleaner allows you to clean your air conditioner without using water that can get to the electrical parts.
2. Utilize the same foaming coil cleaner to clean the rear fins of your air conditioner. For tough dirt, apply a soft brush to scrub the dirt off afterwards you lot spray the foaming scroll cleaner.
3. Mix warm water and mild dishwashing liquid and pour information technology into a sprayer. Spray the solution on the remaining surfaces of your air conditioner, similar the vents where the cold air is diddled out.
4. Wipe the moist surface with a dry cleaning fabric. Repeat every bit needed.
5. Do the same thing on other parts of the air conditioner that needs to be cleaned.

The Frost King ACF19 Foam Coil Cleaner is available on Amazon. Cheque information technology out through this link.

Reassembling Your Air Conditioner

1. Expect for your air conditioner to dry naturally.
2. Reassemble the parts of your air conditioner that you removed, like the forepart and back casing.
3. Reinsert the filter.
4. Plug your air conditioner back into the socket.

How to make clean a GE built-in air conditioner?

A GE built-in air conditioner is the same every bit a through-the-wall air conditioner. These air conditioners are installed through a hole in the wall.

Unlike window air conditioners, congenital-in air conditioners do not have side vents because the thickness of the wall tin can hands block these vents. There will be a drib in operation and efficiency if any of the vents of an air conditioner is blocked.

Cleaning a GE built-in air conditioner is similar to cleaning a window air conditioner. Apply the same steps that we provided above to make clean your GE window air conditioner.

However, because how this type of air conditioner is installed, it is best to clean information technology using the steps where you do not remove it from the wall. Built-in air conditioners are installed more permanently than window air conditioners and can be harder to remove and reinstall.

How to clean a GE portable air conditioner?

A portable air conditioner is a type of air conditioner that you can move to unlike rooms where you demand cooling. It is not installed permanently in a single room, although y'all can cull to leave information technology installed in a single room.

This model normally sits on the floor close to the window where its removable vents are installed.

Hither are the simple steps to clean your GE portable air conditioner:

Cleaning The Exterior Of Your GE Portable Air Conditioner

1. Turn off your portable air conditioner.
2. Unplug the air conditioner from the wall socket.
3. Get a soft material and dampen it with water.
4. Gently wipe the exterior of the air conditioner case with a clammy soft cloth. Never employ any spray cleaner on your GE portable air conditioner. Never employ chemical cleaners, abrasives, bleach, detergent concentrates, ammonia, scouring pads, or solvents.
5. Utilize a dry soft cloth to dry up the casing.

Cleaning The Air Filter Of Your GE Air Conditioner

Some GE portable air conditioners take ii air filters. Make sure to make clean both.

It is recommended that yous clean the air filters at least once a week. Clean it more oftentimes if you live in a dusty area.

1. Remove the back filter by releasing the upper filter console.
2. Remove the side filter past using the tabs to grip the filter and pull it out. In some models, side filters will easily slide out after the rear filter has been removed.
3. Allow warm water wash the dust off the filters. Alternatively, y'all can use a vacuum cleaner to suck the dust off the filters.
4. Gently shake the filters to remove excess water and whatever grit or dirt that is still on the filter.
5. Let the filter dry out naturally.
6. Reinsert the filter into your GE portable air conditioner.

Draining The Water Tank

You will run across the 'Water Full' indicator light in one case the internal water tank is filled with water from condensation.

1. Place an empty pan under the drain valve. This is usually located at the back of your portable air conditioner.
2. Remove the valve cap. Carefully remove the rubber drain plug.
3. Look until the h2o has been completely drained.
4. Reinsert the prophylactic bleed plug.
5. Screw back the cap.
6. Plug the portable air conditioner dorsum in.

Conclusion

Cleaning a GE air conditioner can exist a simple weekend DIY task. But follow the simple steps above, and your GE air conditioner will be clean and efficient once more.

If yous found this article interesting, why non check the two articles below as well:

Why Does My GE Air Conditioner Continue Freezing Upward?

How To Connect GE Air Conditioner To Alexa Or Google Home?

Source: https://hvacseer.com/how-to-clean-ge-air-conditioner/

Posted by: noonjons1983.blogspot.com

Share this post